TSX.V: CCC

Appleton Completes First Phase of 2010 Drill Program at Manalo

April 29, 2010 Vancouver, British Columbia. Appleton Exploration Inc. (AEX - TSX.V) has completed the first phase of the spring 2010 drilling program at its Manalo Gold Project in the Republic of Mali, West Africa. This phase focused on the northern and southern segments of the Dialafara Zone. Thirty seven reverse circulation (RC) holes totaling 4,300 metres and 67 air core holes totaling 3,771 metres were completed. Samples were shipped to ALS Chemex in Bamako, Mali at regular intervals throughout the program. Assay results are pending and expected before the end of May.

Dialafara Zone

The Dialafara Zone consists of a 3.7 kilometre long gold soil anomaly. The zone appears to be fault off-set, resulting in a 2 kilometre long northern segment and a 1.7 kilometre long southern segment.

Dialafara Northern Segment

Of the 2 kilometre long gold soil anomaly, drilling has defined gold mineralization in the Dialafara Northern Segment for a strikelength of over 600 metres to date, which locally occurs as multiple sub parallel zones across a 55 metre wide northwest trend. The Northern Segment is centred on a 200 metre long zone of artisanal workings. Previously reported drilling has returned several intervals between 0.30 gpt Au to 2.5 gpt Au over widths from 7 to 16 metres. In addition, higher grade drill intercepts had been encountered within the Northern Segment, including 640 gpt Au over 3 metres, 15.64 gpt Au over 16 metres and 35.67 gpt Au over 7 metres.

During the 2010 Phase 1 program seven reverse circulation holes totalling 852 metres were completed in the Northern Segment. An additional 16 air core holes totalling 938 metres were completed on the "32 Zone" immediately to the southeast of the Northern Segment, testing for a parallel structure.

Dialafara Southern Segment

Of the 1.7 kilometres long soil anomaly, drilling to date in the Dialafara Southern Segment has been focused on a 700 metre strikelength of the anomaly. There are three separate zones of artisanal workings along this 700 metre trend. The Southern Segment consists of a dominant northwest trending mineralized zone with multiple subsidiary northeast trending zones. The artisanal workings appear to extend up to 100 metres in a northeast direction. Previously reported drilling has returned several intervals between 0.30 gpt Au to 6.27 gpt Au over widths from 5 to 25 metres. In addition, higher grade drill intercepts had been encountered within the Southern Segment, including 29.07 gpt Au over 6 metres and 9.57 gpt Au over 9 metres.

During the 2010 Phase 1 program twenty-nine reverse circulation holes totalling 3,328 metres were completed in the Southern Segment. In addition, 43 air core holes totalling 2,361 metres were completed in the Southern Segment to test for strikelength expansion of the zone.

Quality Control and Assurance

All samples were sent to ALS Chemex in Bamako, an ISO 17025 certified laboratory, for assay. Standard, blank and duplicate samples were inserted throughout the sample sequence as quality control checks. Both Chris Wild, P.Eng. and Paul Cowley, P.Geo. are qualified persons for the drilling campaign.

About Mali

Mali is the fastest growing gold producing country in Africa. Production in 2007 amounted to 2 million ounces of gold making Mali Africa's third-largest gold producer after South Africa and Ghana. AngloGold Ashanti Limited, one of the largest gold mining companies in the world, has interests in three operating mines in Mali: Sadiola, Yatela and Morila.

On Behalf of the Board of Directors,

"R. Tim Henneberry"

R.Tim Henneberry, P.Geo.

President and CEO

For further information, please contact:

For Investor Relations Information contact:

Tim Henneberry:  (604) 694-0741

Contact Financial Corp.

604.689.7422 Toll Free 1.877.689.7411

Paul Cowley, P.Geo., Director of Appleton Exploration Inc., is the Qualified Person as defined in National Instrument 43-101, who has reviewed and approved the technical content of this news release.

Neither the TSX Venture Exchange nor its Regulations Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

This press release contains forward-looking statements.  All statements, other than statements of historical fact, constitute "forward-looking statements" and include any information that addresses activities, events or developments that the Company believes, expects or anticipates will or may occur in the future including the Company's planned drilling programs and strategy, plans or future financial or operating performance and other statements that express management's expectations or estimates of future performance.

Forward-looking statements are generally identifiable by the use of the words "may", "will", "should", "continue", "expect", "anticipate", "estimate", "believe", "intend", "plan" or "project" or the negative of these words or other variations on these words or comparable terminology.  All such forward-looking information and statements are based on certain assumptions and analyses made by the Company's management in light of their experience and perception of historical trends, current conditions and expected future developments, as well as other factors management believes are appropriate in the circumstances.  These statements, however, are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed, implied by or projected in the forward-looking information or statements.  Important factors that could cause actual results to differ from these forward-looking statements include but are not limited to: risks related to the exploration and potential development of the Company's projects, risks related to international operations, the actual results of current exploration activities, conclusions of economic evaluations, changes in project parameters as plans continue to be refined, future prices of gold, as well as those factors discussed in the sections relating to risk factors of the Company set out in the Company's MD&A filed on SEDAR.

There can be no assurance that any forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, the reader should not place any undue reliance on forward-looking information or statements.  Except as required by law, the Company does not intend to revise or update these forward-looking statements after the date of this document or to revise them to reflect the occurrence of future unanticipated events.

This website includes certain "forward-looking statements" such as estimates and statements that describe Cornerstone Metal Inc.’s property, future plans, objectives or goals. All statements in this website, other than statements of historical facts, that address future production, resource potential, exploration and development activities and events or developments that the Company expects, are forward-looking statements. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause actual results, performance or developments to differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include, but are not limited to, market prices, environmental conditions, judicial, regulatory and political developments, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions.